|
|
$121.99
Medium HJC CL-15 Pegasus Helmets
Dennis Kirk Part #: 3302099M
Medium HJC CL-15 Pegasus Helmets: HJC's all new CL-15 Pegasus combines a bold tribal base with overlapped pinstriping detail for a deeply layered look without getting too busy and the satin finish treatment only adds contrast for excellent shelf and street appeal. Advanced polycarbonate composite shell structure. Meets or exceeds SNELL M2005 and DOT standards and FIM race ready. Wind tunnel tested aerodynamic shell shape. Multiple density impact absorbing EPS liner. Three shell sizes provide superior sport fit. ACS Advance Channeling Ventilation system. Adjustable Ram Air chin bar vent. 2 stage compression shield closure system. Improved, tool-less shield removal and installation. Optically superior 3D shield design, hard coated exterior, anti-fog coated interior, rated at 95% UV resistant. Removable/washable Bioceramic Nylex interior. Streamline, wrap-around neck roll reduces wind noise. Optional shields: RST mirrored, high definition, smoke, Pinlock ready and 2D race shields w/tear-off posts..
2 on Hand
More Info/Options for Medium HJC CL-15 Pegasus Helmets
|
|
|
|
$154.99
Medium HJC CL-15 Pegasus Helmets
Dennis Kirk Part #: 3302303M
Medium HJC CL-15 Pegasus Helmets: Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb. 6 oz.. Breath deflector included. Padded D-ring retention strap, , REPLACEMENT SHIELDS: , Clear: 32-6044. Amber: 32-6045. Smoke: 32-6046..
2 on Hand
More Info/Options for Medium HJC CL-15 Pegasus Helmets
|
|
|
|
$154.99
Medium HJC CL-15 Pegasus Helmets
Dennis Kirk Part #: 3302303M
Medium HJC CL-15 Pegasus Helmets: Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb. 6 oz.. Breath deflector included. Padded D-ring retention strap, , REPLACEMENT SHIELDS: , Clear: 32-6044. Amber: 32-6045. Smoke: 32-6046..
2 on Hand
More Info/Options for Medium HJC CL-15 Pegasus Helmets
|
|
|
|
CLOSEOUT!
Was: $149.99
Now: $134.99
Medium HJC CL-15 SN
Dennis Kirk Part #: 3301619M
Medium HJC CL-15 SN: Manufacturer part # 153-933 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb. 6 oz.. Breath deflector included. Padded D-ring retention strap, , REPLACEMENT SHIELDS: , Clear: 32-6044. Amber: 32-6045. Smoke: 32-6046.. 153-933
1 on Hand
More Info/Options for Medium HJC CL-15 SN
|
|
|
|
CLOSEOUT!
Was: $154.99
Now: $139.49
Medium HJC CL-15 SN Helmets
Dennis Kirk Part #: 3301628M
Medium HJC CL-15 SN Helmets: Manufacturer part # 155-893 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb. 6 oz.. Breath deflector included. Padded D-ring retention strap, , REPLACEMENT SHIELDS: , Clear: 32-6044. Amber: 32-6045. Smoke: 32-6046.. 155-893
9 on Hand
More Info/Options for Medium HJC CL-15 SN Helmets
|
|
|
|
$80.99
Medium HJC CL-21 Reign Flame Helmets
Dennis Kirk Part #: 3301014M
Medium HJC CL-21 Reign Flame Helmets: Manufacturer part # 806-853 - Shell is constructed of lightweight injection molded thermoplastic alloy. Two shell sizes for a more comfortable fit. Venting: Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent. Comfortable brushed plush Nylex interior with sewn-in crown pad. Removable zip-out ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor. DOT approved.. 806-853
6 on Hand
More Info/Options for Medium HJC CL-21 Reign Flame Helmets
|
|
|
|
CLOSEOUT!
Was: $80.99
Now: $72.89
Medium HJC CL-21 Reign Flame Helmets
Dennis Kirk Part #: 3301014M
Medium HJC CL-21 Reign Flame Helmets: Manufacturer part # 806-853 - Shell is constructed of lightweight injection molded thermoplastic alloy. Two shell sizes for a more comfortable fit. Venting: Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent. Comfortable brushed plush Nylex interior with sewn-in crown pad. Removable zip-out ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor. DOT approved.. 806-853
3 on Hand
More Info/Options for Medium HJC CL-21 Reign Flame Helmets
|
|
|
|
$80.99
Medium HJC CL-21M Skull N Thornz Helmet
Dennis Kirk Part #: 3302111M
Medium HJC CL-21M Skull N Thornz Helmet: The -CL-21 comes in a wide variety of deep, dark graphics which capture the attitude and feel of the true open-road warrior. Advanced polycarbonate composite shell structure. Meets or exceeds DOT. Low profile and streamline 3-snap visor design. Multiple density impact absorbing EPS liner. Two shell sizes provide superior fit. Channeling ventilation with 2 multi-stage intake vents. Sewn-in brushed nylon interior. Streamline, wrap-around neck roll reduces wind noise. Removable zip-out ear flaps with built-in speaker pockets. Nylon retention band with double D-ring secures retention strap with anti-flutter strap. Medium helmet weighs 2 lbs., 5 oz...
5 on Hand
More Info/Options for Medium HJC CL-21M Skull N Thornz Helmet
|
|
|
|
$98.99
Medium HJC CL-31 Racer II Helmets
Dennis Kirk Part #: 3301586M
Medium HJC CL-31 Racer II Helmets: Manufacturer part # 824-853 - Constructed of lightweight injection molded polycarbonate. Two piece channeled dual density expanded poly-styrene liner for shock absorption and direct channeling air flow. Channeled adjustable forehead vents with venturi rear exhaust vents create a flow-through ventilation system. Comfortable plush brushed Nylon interior with sewn-in crown pad. Nylon strap retention band with double D-ring neatly secure chin strap. Comes with 3 snap black visor. Snell and D.O.T approved. Weight of medium helmet 2lb. 9oz... 824-853
4 on Hand
More Info/Options for Medium HJC CL-31 Racer II Helmets
|
|
|
|
$98.99
Medium HJC CL-31 Racer II Helmets
Dennis Kirk Part #: 3301586M
Medium HJC CL-31 Racer II Helmets: Manufacturer part # 824-853 - Constructed of lightweight injection molded polycarbonate. Two piece channeled dual density expanded poly-styrene liner for shock absorption and direct channeling air flow. Channeled adjustable forehead vents with venturi rear exhaust vents create a flow-through ventilation system. Comfortable plush brushed Nylon interior with sewn-in crown pad. Nylon strap retention band with double D-ring neatly secure chin strap. Comes with 3 snap black visor. Snell and D.O.T approved. Weight of medium helmet 2lb. 9oz... 824-853
3 on Hand
More Info/Options for Medium HJC CL-31 Racer II Helmets
|
|
|
|
$188.99
Medium HJC CL-Max Evolve Helmets
Dennis Kirk Part #: 3302112M
Medium HJC CL-Max Evolve Helmets: HJC's CL-MAX modular helmet series give you all the convenience of an open-face helmet with the protection and benefits of a full-face helmet. The CL-MAX features a central locking mechanism for easy one handed opening and closing of the chin bar/face shield. Injection molded polycarbonate shell construction. Meets or exceeds DOT standards. Wind tunnel tested aerodynamic shell shape. Multiple density impact absorbing EPS liner. Central locking mechanism. One handed face shield/chin bar operation. Adjustable chin bar vent and top vents. 2 stage compression shield closure system compresses the shield upon increased speeds. Tool-less shield removal and installation. Aerodynamic scratch resistant hard coated shield. Optically superior 3D shield design rated at 95% UV resistant. Removable, washable Nylex liner and cheek pads. Wrap around neckroll for minimal noise levels. Helmet storage bag included. Built-in communication system speaker cavity. Easily converts to snowmobile application with optional breath box and dual lens shield. Optional mirrored, high definition (amber), dark smoke, smoke, Pinlock ready and tear-off shields..
2 on Hand
More Info/Options for Medium HJC CL-Max Evolve Helmets
|
|
|
|
$188.99
Medium HJC CL-Max Evolve Helmets
Dennis Kirk Part #: 3302112M
Medium HJC CL-Max Evolve Helmets: HJC's CL-MAX modular helmet series give you all the convenience of an open-face helmet with the protection and benefits of a full-face helmet. The CL-MAX features a central locking mechanism for easy one handed opening and closing of the chin bar/face shield. Injection molded polycarbonate shell construction. Meets or exceeds DOT standards. Wind tunnel tested aerodynamic shell shape. Multiple density impact absorbing EPS liner. Central locking mechanism. One handed face shield/chin bar operation. Adjustable chin bar vent and top vents. 2 stage compression shield closure system compresses the shield upon increased speeds. Tool-less shield removal and installation. Aerodynamic scratch resistant hard coated shield. Optically superior 3D shield design rated at 95% UV resistant. Removable, washable Nylex liner and cheek pads. Wrap around neckroll for minimal noise levels. Helmet storage bag included. Built-in communication system speaker cavity. Easily converts to snowmobile application with optional breath box and dual lens shield. Optional mirrored, high definition (amber), dark smoke, smoke, Pinlock ready and tear-off shields..
1 on Hand
More Info/Options for Medium HJC CL-Max Evolve Helmets
|
|
|
|
$170.99
Medium HJC CL-Max Modular Helmets
Dennis Kirk Part #: 3300862M
Medium HJC CL-Max Modular Helmets: Manufacturer part # 814-133 - DOT APPROVED. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-133
3 on Hand
More Info/Options for Medium HJC CL-Max Modular Helmets
|
|
|
|
CLOSEOUT!
Was: $209.99
Now: $120.00
Medium HJC CL-Max Modular Helmets
Dennis Kirk Part #: 3301098M
Medium HJC CL-Max Modular Helmets: Manufacturer part # 817-923 - DOT certified. Shell is injectjion-molded thermoplastic. One-touch button for easy, secure opening or closing of helmet shield and chin bar. Flush-mount, single button release double-lens face shield requires no tools. Vacuum Ventilation airflow system with adjustable forehead and chin bar vents; vents direct airflow to top rear exhaust vents. Channeled EPS liner and cheek pads provide maximum airflow and improved comfort. Built-in neck roll exhaust vent. Removable Nylex lining and cheek pads. Includes breath guard. D-ring retention. Medium helmet weighs 3 lb., 11 oz.. 817-923
2 on Hand
More Info/Options for Medium HJC CL-Max Modular Helmets
|
|
|
|
$170.99
Medium HJC CL-Max Modular Helmets
Dennis Kirk Part #: 3300862M
Medium HJC CL-Max Modular Helmets: Manufacturer part # 814-133 - DOT APPROVED. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-133
2 on Hand
More Info/Options for Medium HJC CL-Max Modular Helmets
|
|
|
|
$161.99
Medium HJC CL-SP Apex Helmets
Dennis Kirk Part #: 3302105M
Medium HJC CL-SP Apex Helmets: No model line is complete without the full coverage, full color application graphic and the Apex completes the CL-SP series perfectly. Striking animation style detail on a colored shell base with high gloss gel coat combine for excellent shelf and street appeal. Advanced polycarbonate composite shell structure. Meets or exceeds SNELL M2005 and DOT standards and FIM race ready. Wind tunnel tested aerodynamic shell shape. Multiple density impact absorbing EPS liner. Three shell sizes provide superior sport fit. ACS Advance Channeling Ventilation system. Adjustable Ram Air chin bar vent. 2 stage compression shield closure system. Improved, tool-less shield removal and installation. Optically superior 3D shield design, hard coated exterior, anti-fog coated interior, rated at 95% UV resistant. Removable/washable Bioceramic Nylex interior. Streamline, wrap-around neck roll reduces wind noise. Optional shields: RST mirrored, high definition, smoke, Pinlock ready and 2D race shields w/tear-off posts..
Expected Soon
More Info/Options for Medium HJC CL-SP Apex Helmets
|
|
|
|
$189.99
Medium HJC CL-SP Apex Helmets
Dennis Kirk Part #: 3302309M
Medium HJC CL-SP Apex Helmets: Snell M2005 and DOT certified. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no-tool shield removal and installation. Aerodynamic dual-lens shield. Removable/washable Bioceramic Nylex® interior quickly wicks moisture away from skin and elminates odor-causing bacteria. Streamlined, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Padded double D-ring retention strap. , , REPLACEMENT SHIELDS: , Clear: 32-6044. Amber: 32-6045. Smoke: 32-6046.
1 on Hand
More Info/Options for Medium HJC CL-SP Apex Helmets
|
|
|
|
$170.99
Medium HJC CL-SP Barbwire Helmets
Dennis Kirk Part #: 3302107M
Medium HJC CL-SP Barbwire Helmets: HJC's all new CL-SP Barbwire raises the bold bar without relying on big color. Instead, the highly stylized, satin finish, barbwire wraps around he shell for full coverage attitude combined with UV coated satin finish silver vents and rear spoiler for a totally integrated look! Advanced polycarbonate composite shell structure. Meets or exceeds SNELL M2005 and DOT standards and FIM race ready. Wind tunnel tested aerodynamic shell shape. Multiple density impact absorbing EPS liner. Three shell sizes provide superior sport fit. ACS Advance Channeling Ventilation system. Adjustable Ram Air chin bar vent. 2 stage compression shield closure system. Improved, tool-less shield removal and installation. Optically superior 3D shield design, hard coated exterior, anti-fog coated interior, rated at 95% UV resistant. Removable/washable Bioceramic Nylex interior. Streamline, wrap-around neck roll reduces wind noise. Optional shields: RST mirrored, high definition, smoke, Pinlock ready and 2D race shields w/tear-off posts..
3 on Hand
More Info/Options for Medium HJC CL-SP Barbwire Helmets
|
|
|
|
$199.99
Medium HJC CL-SP Barbwire Helmets
Dennis Kirk Part #: 3302314M
Medium HJC CL-SP Barbwire Helmets: Snell M2005 and DOT certified. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no-tool shield removal and installation. Aerodynamic dual-lens shield. Removable/washable Bioceramic Nylex® interior quickly wicks moisture away from skin and elminates odor-causing bacteria. Streamlined, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Padded double D-ring retention strap. , , REPLACEMENT SHIELDS: , Clear: 32-6044. Amber: 32-6045. Smoke: 32-6046.
2 on Hand
More Info/Options for Medium HJC CL-SP Barbwire Helmets
|
|
|
|
$152.99
Medium HJC CL-SP Helmets
Dennis Kirk Part #: 3301401M
Medium HJC CL-SP Helmets: Manufacturer part # 350-143 - Snell and DOT certified. New hyper-sport helmet features aggressive shell sculpture, innovative features and comfort. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and Venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing and extremely secure seal. Improved, no-tool shield removal and installation. Scratch-resistant hard-coated shield is rated at 95% UV resistant. Removable/washable bioceramic Nylex interior quickly wicks moisture away from skin and elminates odor causing bacteria. Streamline, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 350-143
2 on Hand
More Info/Options for Medium HJC CL-SP Helmets
|
|
|
|
$152.99
Medium HJC CL-SP Helmets
Dennis Kirk Part #: 3301401M
Medium HJC CL-SP Helmets: Manufacturer part # 350-143 - Snell and DOT certified. New hyper-sport helmet features aggressive shell sculpture, innovative features and comfort. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and Venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing and extremely secure seal. Improved, no-tool shield removal and installation. Scratch-resistant hard-coated shield is rated at 95% UV resistant. Removable/washable bioceramic Nylex interior quickly wicks moisture away from skin and elminates odor causing bacteria. Streamline, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 350-143
2 on Hand
More Info/Options for Medium HJC CL-SP Helmets
|
|
|
|
CLOSEOUT!
Was: $166.99
Now: $150.29
Medium HJC CL-SP Helmets
Dennis Kirk Part #: 3301414M
Medium HJC CL-SP Helmets: Manufacturer part # 364-853 - Snell and DOT certified. New hyper-sport helmet features aggressive shell sculpture, innovative features and comfort. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and Venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that co | |
