HJC CL-15 Helmet 150-262, HJC CL-15 Helmet 150-263

This site contains about 140,285 documents.

View by:

Page: 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,540 1,550 1,560 1,570 1,580 1,590 1,600 1,610 1,620 1,632 1,633 1,634 1,635 1,636 1,637 1,638 1,639 1,640 1,641 1,642 1,643 1,644 1,645 1,646 1,647 1,648 1,649 1,650 1,651 1,652 1,653 1,654 1,655 1,656 1,657 1,658 1,659 1,660 1,661 1,670 1,680 1,690 1,700 1,710 1,720 1,730 1,740 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 3,000 4,000 4,677

$121.99 Cheap HJC CL-15 Helmet 150-262
Manufacturer: HJC
Dennis Kirk Part #: 3301385S
HJC CL-15 Helmet: Manufacturer part # 150-262 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-262
4 on hand

More Info/Options for HJC CL-15 Helmet 150-262

$121.99 Cheap HJC CL-15 Helmet 150-263
Manufacturer: HJC
Dennis Kirk Part #: 3301385M
HJC CL-15 Helmet: Manufacturer part # 150-263 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-263
4 on hand

More Info/Options for HJC CL-15 Helmet 150-263

$121.99 Cheap HJC CL-15 Helmet 150-264
Manufacturer: HJC
Dennis Kirk Part #: 3301385L
HJC CL-15 Helmet: Manufacturer part # 150-264 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-264
3 on hand

More Info/Options for HJC CL-15 Helmet 150-264

$121.99 Cheap HJC CL-15 Helmet 150-265
Manufacturer: HJC
Dennis Kirk Part #: 3301385XL
HJC CL-15 Helmet: Manufacturer part # 150-265 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-265
2 on hand

More Info/Options for HJC CL-15 Helmet 150-265

$121.99 Cheap HJC CL-15 Helmet 150-266
Manufacturer: HJC
Dennis Kirk Part #: 3301385XXL
HJC CL-15 Helmet: Manufacturer part # 150-266 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-266
3 on hand

More Info/Options for HJC CL-15 Helmet 150-266

$121.99 Cheap HJC CL-15 Helmet 150-267
Manufacturer: HJC
Dennis Kirk Part #: 3301385XXXL
HJC CL-15 Helmet: Manufacturer part # 150-267 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-267
1 on hand

More Info/Options for HJC CL-15 Helmet 150-267

$121.99 Cheap HJC CL-15 Helmet 150-461
Manufacturer: HJC
Dennis Kirk Part #: 3301386XS
HJC CL-15 Helmet: Manufacturer part # 150-461 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-461
1 on hand

More Info/Options for HJC CL-15 Helmet 150-461

$121.99 Cheap HJC CL-15 Helmet 150-462
Manufacturer: HJC
Dennis Kirk Part #: 3301386S
HJC CL-15 Helmet: Manufacturer part # 150-462 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-462
2 on hand

More Info/Options for HJC CL-15 Helmet 150-462

$121.99 Cheap HJC CL-15 Helmet 150-463
Manufacturer: HJC
Dennis Kirk Part #: 3301386M
HJC CL-15 Helmet: Manufacturer part # 150-463 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-463
2 on hand

More Info/Options for HJC CL-15 Helmet 150-463

$121.99 Cheap HJC CL-15 Helmet 150-464
Manufacturer: HJC
Dennis Kirk Part #: 3301386L
HJC CL-15 Helmet: Manufacturer part # 150-464 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-464
1 on hand

More Info/Options for HJC CL-15 Helmet 150-464

$121.99 Cheap HJC CL-15 Helmet 150-465
Manufacturer: HJC
Dennis Kirk Part #: 3301386XL
HJC CL-15 Helmet: Manufacturer part # 150-465 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-465
1 on hand

More Info/Options for HJC CL-15 Helmet 150-465

$121.99 Cheap HJC CL-15 Helmet 150-466
Manufacturer: HJC
Dennis Kirk Part #: 3301386XXL
HJC CL-15 Helmet: Manufacturer part # 150-466 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-466
1 on hand

More Info/Options for HJC CL-15 Helmet 150-466

$121.99 Cheap HJC CL-15 Helmet 150-467
Manufacturer: HJC
Dennis Kirk Part #: 3301386XXXL
HJC CL-15 Helmet: Manufacturer part # 150-467 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-467
1 on hand

More Info/Options for HJC CL-15 Helmet 150-467

$121.99 Cheap HJC CL-15 Helmet 150-581
Manufacturer: HJC
Dennis Kirk Part #: 3301387XS
HJC CL-15 Helmet: Manufacturer part # 150-581 - SNELL and DOT certified. New lightweight injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation systemincludes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Shield has a flush-mounted fit for reduced turbulence and is rated at 95% UV resistant. Removable, washable Nylex cheek pads and comfort liner. Streamline, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Weight of medium helmet 3lb., 11oz.. Padded D-ring retention strap. 150-581
1 on hand

More Info/Options for HJC CL-15 Helmet 150-581