HJC CL-SP 351-582, HJC CL-SP 351-601, HJC CL-SP 351-141, HJC CL-SP 351-142

This site contains about 138,337 documents.

View by:

Page: 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,520 1,530 1,540 1,550 1,560 1,570 1,580 1,590 1,600 1,612 1,613 1,614 1,615 1,616 1,617 1,618 1,619 1,620 1,621 1,622 1,623 1,624 1,625 1,626 1,627 1,628 1,629 1,630 1,631 1,632 1,633 1,634 1,635 1,636 1,637 1,638 1,639 1,640 1,641 1,650 1,660 1,670 1,680 1,690 1,700 1,710 1,720 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 3,000 4,000 4,612

$170.99 Cheap HJC CL-MAX Modular Helmet 814-582
Manufacturer: HJC
Dennis Kirk Part #: 3300866S
HJC CL-MAX Modular Helmet: Manufacturer part # 814-582 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-582
3 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-582

$170.99 Cheap HJC CL-MAX Modular Helmet 814-583
Manufacturer: HJC
Dennis Kirk Part #: 3300866M
HJC CL-MAX Modular Helmet: Manufacturer part # 814-583 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-583
3 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-583

$170.99 Cheap HJC CL-MAX Modular Helmet 814-584
Manufacturer: HJC
Dennis Kirk Part #: 3300866L
HJC CL-MAX Modular Helmet: Manufacturer part # 814-584 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-584
4 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-584

$170.99 Cheap HJC CL-MAX Modular Helmet 814-585
Manufacturer: HJC
Dennis Kirk Part #: 3300866XL
HJC CL-MAX Modular Helmet: Manufacturer part # 814-585 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-585
2 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-585

$170.99 Cheap HJC CL-MAX Modular Helmet 814-586
Manufacturer: HJC
Dennis Kirk Part #: 3300866XXL
HJC CL-MAX Modular Helmet: Manufacturer part # 814-586 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-586
2 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-586

$170.99 Cheap HJC CL-MAX Modular Helmet 814-587
Manufacturer: HJC
Dennis Kirk Part #: 3300866XXXL
HJC CL-MAX Modular Helmet: Manufacturer part # 814-587 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-587
2 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-587

$161.99 Cheap HJC CL-MAX Modular Helmet 814-601
Manufacturer: HJC
Dennis Kirk Part #: 3300867XS
HJC CL-MAX Modular Helmet: Manufacturer part # 814-601 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-601
1 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-601

$161.99 Cheap HJC CL-MAX Modular Helmet 814-602
Manufacturer: HJC
Dennis Kirk Part #: 3300867S
HJC CL-MAX Modular Helmet: Manufacturer part # 814-602 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-602
2 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-602

$161.99 Cheap HJC CL-MAX Modular Helmet 814-603
Manufacturer: HJC
Dennis Kirk Part #: 3300867M
HJC CL-MAX Modular Helmet: Manufacturer part # 814-603 - DOT APPROVED. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-603
4 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-603

$161.99 Cheap HJC CL-MAX Modular Helmet 814-604
Manufacturer: HJC
Dennis Kirk Part #: 3300867L
HJC CL-MAX Modular Helmet: Manufacturer part # 814-604 - DOT APPROVED. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-604
4 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-604

$161.99 Cheap HJC CL-MAX Modular Helmet 814-605
Manufacturer: HJC
Dennis Kirk Part #: 3300867XL
HJC CL-MAX Modular Helmet: Manufacturer part # 814-605 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-605
4 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-605

$161.99 Cheap HJC CL-MAX Modular Helmet 814-606
Manufacturer: HJC
Dennis Kirk Part #: 3300867XXL
HJC CL-MAX Modular Helmet: Manufacturer part # 814-606 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-606
2 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-606

$161.99 Cheap HJC CL-MAX Modular Helmet 814-607
Manufacturer: HJC
Dennis Kirk Part #: 3300867XXXL
HJC CL-MAX Modular Helmet: Manufacturer part # 814-607 - DOT approved. Shell is injection molded thermal plastic. Injection molded thermoplastic. Two Channeled expended poly-styrene liner. One-handed operation for easy opening and closing of chin/face shield. Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. Comfortable Nylex liner and cheek pads. Optional cheek pad sizes to achieve and custom fit. Wrap around neck roll reduces wind noise. Double D ring chin strap retention system easily secures excess chin strap length.. Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 100 percent protection from U.V. rays. Weight of medium helmet 3lb. 11oz... 814-607
4 on hand

More Info/Options for HJC CL-MAX Modular Helmet 814-607

CLOSEOUT!
Was: $179.99
Now: $107.99
Cheap HJC CL-SP 351-141
Manufacturer: HJC
Dennis Kirk Part #: 3301629XS
HJC CL-SP: Manufacturer part # 351-141 - Snell M2005 and DOT certified. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no-tool shield removal and installation. Aerodynamic dual-lens shield. Removable/washable Bioceramic Nylex interior quickly wicks moisture away from skin and elminates odor-causing bacteria. Streamlined, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Padded double D-ring retention strap.. 351-141
1 on hand

More Info/Options for HJC CL-SP 351-141

CLEARANCE!
Was: $179.99
Now: $107.99
Cheap HJC CL-SP 351-142
Manufacturer: HJC
Dennis Kirk Part #: 3301629S
HJC CL-SP: Manufacturer part # 351-142 - Snell M2005 and DOT certified. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no-tool shield removal and installation. Aerodynamic dual-lens shield. Removable/washable Bioceramic Nylex interior quickly wicks moisture away from skin and elminates odor-causing bacteria. Streamlined, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Padded double D-ring retention strap.. 351-142
2 on hand

More Info/Options for HJC CL-SP 351-142