HJC CL-15SN Draco Helmet 161-956, HJC CL-15SN Draco Helmet 161-957

This site contains about 138,337 documents.

View by:

Page: 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,520 1,530 1,540 1,550 1,560 1,570 1,580 1,590 1,600 1,606 1,607 1,608 1,609 1,610 1,611 1,612 1,613 1,614 1,615 1,616 1,617 1,618 1,619 1,620 1,621 1,622 1,623 1,624 1,625 1,626 1,627 1,628 1,629 1,630 1,631 1,632 1,633 1,634 1,635 1,640 1,650 1,660 1,670 1,680 1,690 1,700 1,710 1,720 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 3,000 4,000 4,612

$134.99 Cheap HJC CL-15SN Draco Helmet 161-937
Manufacturer: HJC
Dennis Kirk Part #: 3302953XXXL
HJC CL-15SN Draco Helmet: Manufacturer part # 161-937 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-937
Expected Soon

More Info/Options for HJC CL-15SN Draco Helmet 161-937

$134.99 Cheap HJC CL-15SN Draco Helmet 161-951
Manufacturer: HJC
Dennis Kirk Part #: 3302954XS
HJC CL-15SN Draco Helmet: Manufacturer part # 161-951 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-951
1 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-951

$134.99 Cheap HJC CL-15SN Draco Helmet 161-952
Manufacturer: HJC
Dennis Kirk Part #: 3302954S
HJC CL-15SN Draco Helmet: Manufacturer part # 161-952 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-952
2 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-952

$134.99 Cheap HJC CL-15SN Draco Helmet 161-953
Manufacturer: HJC
Dennis Kirk Part #: 3302954M
HJC CL-15SN Draco Helmet: Manufacturer part # 161-953 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-953
2 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-953

$134.99 Cheap HJC CL-15SN Draco Helmet 161-954
Manufacturer: HJC
Dennis Kirk Part #: 3302954L
HJC CL-15SN Draco Helmet: Manufacturer part # 161-954 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-954
3 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-954

$134.99 Cheap HJC CL-15SN Draco Helmet 161-955
Manufacturer: HJC
Dennis Kirk Part #: 3302954XL
HJC CL-15SN Draco Helmet: Manufacturer part # 161-955 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-955
3 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-955

$134.99 Cheap HJC CL-15SN Draco Helmet 161-956
Manufacturer: HJC
Dennis Kirk Part #: 3302954XXL
HJC CL-15SN Draco Helmet: Manufacturer part # 161-956 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-956
1 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-956

$134.99 Cheap HJC CL-15SN Draco Helmet 161-957
Manufacturer: HJC
Dennis Kirk Part #: 3302954XXXL
HJC CL-15SN Draco Helmet: Manufacturer part # 161-957 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-957
Expected Soon

More Info/Options for HJC CL-15SN Draco Helmet 161-957

$134.99 Cheap HJC CL-15SN Draco Helmet 161-981
Manufacturer: HJC
Dennis Kirk Part #: 3302955XS
HJC CL-15SN Draco Helmet: Manufacturer part # 161-981 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-981
1 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-981

$134.99 Cheap HJC CL-15SN Draco Helmet 161-982
Manufacturer: HJC
Dennis Kirk Part #: 3302955S
HJC CL-15SN Draco Helmet: Manufacturer part # 161-982 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-982
2 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-982

$134.99 Cheap HJC CL-15SN Draco Helmet 161-983
Manufacturer: HJC
Dennis Kirk Part #: 3302955M
HJC CL-15SN Draco Helmet: Manufacturer part # 161-983 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-983
1 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-983

$134.99 Cheap HJC CL-15SN Draco Helmet 161-984
Manufacturer: HJC
Dennis Kirk Part #: 3302955L
HJC CL-15SN Draco Helmet: Manufacturer part # 161-984 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-984
2 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-984

$134.99 Cheap HJC CL-15SN Draco Helmet 161-985
Manufacturer: HJC
Dennis Kirk Part #: 3302955XL
HJC CL-15SN Draco Helmet: Manufacturer part # 161-985 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-985
2 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-985

$134.99 Cheap HJC CL-15SN Draco Helmet 161-986
Manufacturer: HJC
Dennis Kirk Part #: 3302955XXL
HJC CL-15SN Draco Helmet: Manufacturer part # 161-986 - Snell M2005 and DOT certified. Lightweight, injection-molded polycarbonate composite helmet combines protection, comfort and innovative features with exceptional value. Wind tunnel-tested, areodynamic shell with an extra-large eye port for greater visibilty. Channeled dual-density expanded polystyrene (EPS) liner. Flow-through ACS advanced-channeling ventilation system includes dual flow-through channels, two high-capacity multi-stage forehead intake vents and two rear venturi exhaust vents. Adjustable chin bar-mounted vortex vents create a low-pressure vacuum, drawing heat and moisture out of the face shield area. Adjustable chin vent redirects air upward and across shield interior. Complete with aerodynamic dual lens shield. Next-generation two-stage compression shield closure system compresses shield into eye port gasket, providing an extremely secure seal as well as no-tool removal/installation. Removable, washable Nylex® cheek pads and comfort liner. Streamlined, wrap-around neck roll reduces wind noise. Built-in communication system speaker cavity. Medium size helmet weighs 3 lb., 6 oz.. Breath deflector included. Padded D-ring retention strap.. 161-986
1 on hand

More Info/Options for HJC CL-15SN Draco Helmet 161-986

$134.99 Cheap HJC CL-15SN Helmets 165-917
Manufacturer: HJC
Dennis Kirk Part #: 3302963XXXL
HJC CL-15SN Helmets: Manufacturer part # 165-917 - Advanced polycarbonate composite shell structure. Meets or exceeds SNELL M2005 and DOT standards. Wind tunnel tested aerodynamic shell shape. Multiple density impact absorbing EPS liner. Three shell sizes provide superior sport fit. Complete with aerodynamic dual lens shield and breath guard. RapidFire shield replacement system: Quick, secure, tool-less removal and installation. 2-stage shield closure mechanism: Compresses shield into the eye post gasket providing an extremely secure seal. ACS Advanced Channeling Ventilation System: Full front to back airflow flushed heat and humidity up and out. Adjustable Ram Air chin bar vent. Removable/washable Nylex interior. Streamline, wrap-around neck roll reduces wind noise.. 165-917
1 on hand

More Info/Options for HJC CL-15SN Helmets 165-917

CLEARANCE!
Was: $80.99
Now: $60.74
Cheap HJC CL-21 Reign Helmet 806-850
Manufacturer: HJC
Dennis Kirk Part #: 3301014XXS
HJC CL-21 Reign Helmet: Manufacturer part # 806-850 - Shell is constructed of lightweight injection molded thermoplastic alloy. Two shell sizes for a more comfortable fit. Venting: Two piece channeled dual density expanded poly-styrene liner for directed airflow. Adjustable top vent. Comfortable brushed plush Nylex interior with sewn-in crown pad. Removable zip-out ear flaps, with built-in speaker pockets. Nylon strap retention band with double D-ring neatly secures chin strap. Comes with 3 snap black visor. DOT approved.. 806-850