|
|
$540.99
Kimpex .75 in. Lug Vantage Track 01402
Dennis Kirk Part #: 01402
Kimpex .75 in. Lug Vantage Track 01402: Manufacturer part # 0495475K - Take advantage of the latest traction technology from Kimpex. Includes 96 pre-molded holes to accept studs in track center section. Patent-pending design of pre-molded holes has virtually eliminated the damage to vital cording compared to drilling your own. Perfect repeating V-pattern takes the guesswork out of studding (four different pairs of locations). Reinforcing around the holes helps prevent studs pulling through under heavy stress. Oversized windows for improved lubrication and longer life of the track slides. Innovative design provides superior lateral stability. Lugs have a .75" height with open space for superior traction and braking performance. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure.. 0495475K
4 on Hand
More Info/Options for Kimpex .75 in. Lug Vantage Track 01402
|
|
|
|
$458.99
Kimpex .75 in. Lug Vantage Track 01405
Dennis Kirk Part #: 01405
Kimpex .75 in. Lug Vantage Track 01405: Manufacturer part # 04-985K - Take advantage of the latest traction technology from Kimpex. Does not have pre-drilled holes. Perfect repeating V-pattern takes the guesswork out of studding (four different pairs of locations). Oversized windows for improved lubrication and longer life of the track slides. Innovative design provides superior lateral stability. Lugs have a .75 in. or .875 in. height with open space for superior traction and braking performance. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure.. 04-985K
3 on Hand
More Info/Options for Kimpex .75 in. Lug Vantage Track 01405
|
|
|
|
$494.99
Kimpex .75 in. Lug Vantage Track 01406
Dennis Kirk Part #: 01406
Kimpex .75 in. Lug Vantage Track 01406: Manufacturer part # 04-987K - Take advantage of the latest traction technology from Kimpex. Does not have pre-drilled holes. Perfect repeating V-pattern takes the guesswork out of studding (four different pairs of locations). Reinforcing around the holes helps prevent studs pulling through under heavy stress. Oversized windows for improved lubrication and longer life of the track slides. Innovative design provides superior lateral stability. Lugs have a .75 in. height with open space for superior traction and braking performance. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure. NOTE: , For 80-81/84-85 Panther this is a 15 inch conversion track from 3.29 pitch to 2.52 pitch and requires sprocket numbers 04136 qty. 1 and 04137 qty 2, which must be purchased separately. 04-987K
6 on Hand
More Info/Options for Kimpex .75 in. Lug Vantage Track 01406
|
|
|
|
$469.99
Kimpex .875 Lug Vantage II Track 01399
Dennis Kirk Part #: 01399
Kimpex .875 Lug Vantage II Track 01399: Manufacturer part # 494887 - Take advantage of the latest traction technology from Kimpex. Oversized windows for improved lubrication and longer life of the track slides. Innovative design provides superior lateral stability. Lugs have a .875 height with open space for superior traction and braking performance. Does not have premolded holes. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure.. 494887
7 on Hand
More Info/Options for Kimpex .875 Lug Vantage II Track 01399
|
|
|
|
|
|
|
|
|
|
|
|
$599.99
Kimpex 1 in. Lug Aggressor Track 01400
Dennis Kirk Part #: 01400
Kimpex 1 in. Lug Aggressor Track 01400: Manufacturer part # 0495310K - No other track puts the power to snow like the Aggressor; the ultimate high-performance track. Revolutionary design incorporates a deep waved rib pattern the entire width of the track for unparalleled deep-snow traction and hard-pack penetration. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure. NOTE: It is the responsibility of the customer to make sure there will be enough clearance around the track after installation. The taller lugs on this track as compared to some originals may interfere with the tunnel, expecially around the bulkhead. Polaris models thru 92 will not be able to use this track with ice studs unless smaller drive sprockets are installed.. 0495310K
3 on Hand
More Info/Options for Kimpex 1 in. Lug Aggressor Track 01400
|
|
|
|
$637.99
Kimpex 1 in. Lug Aggressor Track 01401
Dennis Kirk Part #: 01401
Kimpex 1 in. Lug Aggressor Track 01401: Manufacturer part # 0495410K - No other track puts the power to snow like the Aggressor; the ultimate high-performance track. Revolutionary design incorporates a deep waved rib pattern the entire width of the track for unparalleled deep-snow traction and hard-pack penetration. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure.. 0495410K
1 on Hand
More Info/Options for Kimpex 1 in. Lug Aggressor Track 01401
|
|
|
|
$520.99
Kimpex 1 in. Lug Track 01397
Dennis Kirk Part #: 01397
Kimpex 1 in. Lug Track 01397: Manufacturer part # 0494810K - No other track puts the power to snow like the Aggressor; the ultimate high-performance track. Revolutionary design incorporates a deep waved rib pattern the entire width of the track for unparalleled deep-snow traction and hard-pack penetration. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure. NOTE: It is the responsibility of the customer to make sure there will be enough clearance around the track after installation. The taller lugs on this track as compared to some originals may interfere with the tunnel, particularly around the bulkhead. Polaris models through 92 will not be able to use this track with ice studs unless smaller drive sprockets are installed.. 0494810K
10+ on hand
More Info/Options for Kimpex 1 in. Lug Track 01397
|
|
|
|
$479.99
Kimpex 1 in. Lug Ultimate Traxtion Track 01381
Dennis Kirk Part #: 01381
Kimpex 1 in. Lug Ultimate Traxtion Track 01381: Manufacturer part # 4648100 - Designed for the best in trail traction. Premolded 96-holed pattern. Pitch of 2.52 in. (48). Track features low-rolling resistance and is manufactured with polyester for extra durability. Area around stud holes is reinforced to prevent studs from pulling through. IMPORTANT NOTE: Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance.. 4648100
Expected Soon
More Info/Options for Kimpex 1 in. Lug Ultimate Traxtion Track 01381
|
|
|
|
$561.99
Kimpex 1.2 in. Lug Aggressor Track 01398
Dennis Kirk Part #: 01398
Kimpex 1.2 in. Lug Aggressor Track 01398: Manufacturer part # 0494812K - AGGRESSOR TRACKS. No other track puts the power to snow like the Aggressor; the ultimate high-performance track. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure.. 0494812K
10+ on hand
More Info/Options for Kimpex 1.2 in. Lug Aggressor Track 01398
|
|
|
|
$659.99
Kimpex 1.25 Lug Ultimate Ice Track 01418
Dennis Kirk Part #: 01418
Kimpex 1.25 Lug Ultimate Ice Track 01418: Manufacturer part # 4548125 - Proud to offer the most complete range of tracks in the industry to fit every snowmobiler's needs. All tracks are manufactured using state-of-the-art technology and are constantly judged against the highest ASTM and ISO 9001 quality levels. Kimpex's high-performance tracks are reinforced with Kevlar and nylon cording for extra strength and minimal stretch. All tracks include a one-year limited warranty; except X-Force Race, which is for racing purposes and has no warranty NOTE: This is the new Ultimate Ice track, for those who want the advantage of a studded track without the weight or the hassle. This 15" x 121" Size Code 1 track weighs only 36 lb! (approximate). Features 224 aluminum with carbide tip car-tire-style studs and 24 scratch lines. Clipped every second hole. IMPORTANT NOTE: Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance.. 4548125
3 on Hand
More Info/Options for Kimpex 1.25 Lug Ultimate Ice Track 01418
|
|
|
|
$122.99
Kimpex 15 inch Stationary Backrest with Pad 50101
Dennis Kirk Part #: 50101
Kimpex 15 inch Stationary Backrest with Pad 50101: Manufacturer part # 12-315-02 - Black enamel finish. Durable rectangular channel provides comfort and protection. Comes complete with pad and mounting hardware. Cargo carriers sold separately. Dimensions: 15 in. H (From top of seat) . Dimensions: 23 in. H (From top of tunnel) . Pad Dimensions: 17 1/2 in. W x 10 in. H x 2 1/2 in. Depth . Tunnel Dimensions: 16-16 1/2 in. . . NOTE: Mount frame to tunnel of sled before installing backrest or hold frame to correct width of tunnel when installing backrest.. 12-315-02
10+ on hand
More Info/Options for Kimpex 15 inch Stationary Backrest with Pad 50101
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$459.99
Kimpex 3/4 in. Lug Ultimate Traxtion Track 01383
Dennis Kirk Part #: 01383
Kimpex 3/4 in. Lug Ultimate Traxtion Track 01383: Manufacturer part # 464875 - Designed for the best in trail traction. Premolded 96-holed pattern. Pitch of 2.52 in. (48). Track features low-rolling resistance and is manufactured with polyester for extra durability. Area around stud holes is reinforced to prevent studs from pulling through. IMPORTANT NOTE: Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance.. 464875
1 on Hand
More Info/Options for Kimpex 3/4 in. Lug Ultimate Traxtion Track 01383
|
|
|
|
$45.99
Kimpex 800-lb Swivel Jack 516290
Dennis Kirk Part #: 516290
Kimpex 800-lb Swivel Jack 516290: Manufacturer part # 912955 - 800-lb. capacity pivoting screw-type tongue jack includes all mounting hardware to fit rectangular tongues up to 3 in. x 3 in.. Also fits round tongues. Precision-rolled extra-heavy-duty Acme screw-type drive. Offset swivel caster and tough polypropylene 5-3/4" wheel provide maximum maneuverability. Spring-loaded double-pin locking mechanism lets you easily rotate the jack to towing position. , , Included Items: , 1. (1) Trailer Jack, 2. (2) Mounting Plates, 3. (4) 7/16"-14 x 4-1/2" Hex Bolts, 4. (4) 7/16"-14 Hex Nuts, 5. (4) 7/16 Lock Washers. , , Dimensions:. , Lift Range: 14"-24" MAX. , Wheel Diameter: 5 3/4". , Wheel Width: 1 3/4". , Jack Capacity: 1000 LBS. 912955
10 on Hand
Mor | |
