|
|
|
|
|
|
|
|
|
|
$9.99
Bike Brite Moto-Mask On 314181
Dennis Kirk Part #: 314181
Bike Brite Moto-Mask On 314181: Manufacturer part # MM500 - Temporarily coats and protects your bike from road grime, road debris, bugs, etc. on long trips. Can be used on paint, aluminum, chrome or plastic. Will not wash off from rain - use Moto-Mask Off and Bike-Dry cloth to remove. 6.5 oz can. Sold each.. MM500
10+ on hand
More Info/Options for Bike Brite Moto-Mask On 314181
|
|
|
|
|
|
|
|
|
|
$18.99
Bike Buoys Bike Buoy Mug 27569
Dennis Kirk Part #: 27569
Bike Buoys Bike Buoy Mug 27569: Manufacturer part # 503 - A place to put your beverage. Buoys pivot so your drink will not spill. Caddie accepts standard size cans or bottles or the Drink Buoy; mounting clamp included. Mug includes Coaster buoy insulated drink holder but will also fit most coffee cups - even those with handles; mounting clamp included.. 503
Expected Soon
More Info/Options for Bike Buoys Bike Buoy Mug 27569
|
|
|
|
$6.99
Bike Buoys Bike Buoy Mug 27571
Dennis Kirk Part #: 27571
Bike Buoys Bike Buoy Mug 27571: Manufacturer part # 450 - A place to put your beverage. Buoys pivot so your drink will not spill. Caddie accepts standard size cans or bottles or the Drink Buoy; mounting clamp included. Mug includes Coaster buoy insulated drink holder but will also fit most coffee cups - even those with handles; mounting clamp included.. 450
Expected Soon
More Info/Options for Bike Buoys Bike Buoy Mug 27571
|
|
|
|
$2.99
Bike Buoys Bike Buoy Mug 27572
Dennis Kirk Part #: 27572
Bike Buoys Bike Buoy Mug 27572: Manufacturer part # 356 - A place to put your beverage. Buoys pivot so your drink will not spill. Caddie accepts standard size cans or bottles or the Drink Buoy; mounting clamp included. Mug includes Coaster buoy insulated drink holder but will also fit most coffee cups - even those with handles; mounting clamp included.. 356
1 on Hand
More Info/Options for Bike Buoys Bike Buoy Mug 27572
|
|
|
|
|
|
|
|
$66.99
Biketronics Plug-In Lighting Controls 211162
Dennis Kirk Part #: 211162
Biketronics Plug-In Lighting Controls 211162: Manufacturer part # BT300X - Tailbones converter adds running light and stoplight function to rear turn signals. Compact and heavy-duty, these lighting controls are made to work on all Harleys with or without OEM alarm. Designed by an electrical engineer who literally (wrote the book) on designing-in reliability. LED or custom turn signals can be used. Additional load equalizers not required on FrontRunner and TailBones. Replacement hardware used to remove OEM front signals found on Dresser models included with BlinkerSpot. Easy plug-in installation on XL 04-08 models. American engineered and manufactured.. BT300X
2 on Hand
More Info/Options for Biketronics Plug-In Lighting Controls 211162
|
|
|
|
$189.99
Biketronics Retro Radio CD/Radio Adapter Kit 407148
Dennis Kirk Part #: 407148
Biketronics Retro Radio CD/Radio Adapter Kit 407148: Manufacturer part # BT1004A - Now you can upgrade your current radio to a Sony CD/MP3/XM radio. Kits adapt OEM handlebar controls so you don't have to modify the OEM wire harness. Handlebar control and auto volume function of OEM radio remain the same after kit is installed. Kits include an interface module, face plate, adapter plates and detailed instructions NOTE: Kits are compatible with Ultra models, but disable the CB and systems that depend on CB. NOTE: Radio is not included. Kits work with Sony radios that have the Sony wired remote input.. BT1004A
Expected Soon
More Info/Options for Biketronics Retro Radio CD/Radio Adapter Kit 407148
|
|
|
|
$189.99
Biketronics Retro Radio CD/Radio Adapter Kit 407149
Dennis Kirk Part #: 407149
Biketronics Retro Radio CD/Radio Adapter Kit 407149: Manufacturer part # BT1006 - Now you can upgrade your current radio to a Sony CD/MP3/XM radio. Kits adapt OEM handlebar controls so you don't have to modify the OEM wire harness. Handlebar control and auto volume function of OEM radio remain the same after kit is installed. Kits include an interface module, face plate, adapter plates and detailed instructions NOTE: Kits are compatible with Ultra models, but disable the CB and systems that depend on CB. NOTE: Radio is not included. Kits work with Sony radios that have the Sony wired remote input.. BT1006
1 on Hand
More Info/Options for Biketronics Retro Radio CD/Radio Adapter Kit 407149
|
|
|
|
$189.99
Biketronics Retro Radio CD/Radio Adapter Kit 407451
Dennis Kirk Part #: 407451
Biketronics Retro Radio CD/Radio Adapter Kit 407451: Manufacturer part # BT1002 - Now you can upgrade your current radio to a Sony CD/MP3/XM radio. Kits adapt OEM handlebar controls so you don't have to modify the OEM wire harness. Handlebar control and auto volume function of OEM radio remain the same after kit is installed. Kits include an interface module, face plate, adapter plates and detailed instructions. , , NOTE: Kits are compatible with Ultra models, but disable the CB and systems that depend on CB.. , , NOTE: Radio is not included. Kits work with Sony radios that have the Sony wired remote input... BT1002
1 on Hand
More Info/Options for Biketronics Retro Radio CD/Radio Adapter Kit 407451
|
|
|
|
|
|
$350.99
Billet Aluminum GMA Engineering 4-Piston Rear Custom Billet Aluminum Caliper
Dennis Kirk Part #: H191677
Billet Aluminum GMA Engineering 4-Piston Rear Custom Billet Aluminum Caliper: Manufacturer part # GMA402ST - GMA's mission is to provide high performance, high quality products, priced competitively for the ultimate customer satisfaction of the Harley-Davidson motorcyle rider and enthusiast. Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2 and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors, NOTE: For replacement rear brake pads use:, H19848 - DP pads (set of 2), H192500 - GMA pads (set of 4). GMA402ST
1 on Hand
More Info/Options for Billet Aluminum GMA Engineering 4-Piston Rear Custom Billet Aluminum Caliper
|
|
|
|
|
|
$769.99
Billet Concepts Blade Forward Controls 573812
Dennis Kirk Part #: 573812
Billet Concepts Blade Forward Controls 573812: Manufacturer part # 611306 - These controls are CNC-machined before being given a lustrous finish. They also feature a smooth contoured master cylinder that seems to blend right into the controls for an ultra clean look, and the arms and backing plate are machined out of 3/4 in. aluminum plate for and extra beefy look. , NOTE: Fits models listed or custom applications. 611306
Expected Soon
More Info/Options for Billet Concepts Blade Forward Controls 573812
|
|
|
|
$769.99
Billet Concepts Blade Forward Controls 573813
Dennis Kirk Part #: 573813
Billet Concepts Blade Forward Controls 573813: Manufacturer part # 611307 - These controls are CNC-machined before being given a lustrous finish. They also feature a smooth contoured master cylinder that seems to blend right into the controls for an ultra clean look, and the arms and backing plate are machined out of 3/4 in. aluminum plate for and extra beefy look. , NOTE: Fits models listed or custom applications. 611307
1 on Hand
More Info/Options for Billet Concepts Blade Forward Controls 573813
|
|
|
|
$769.99
Billet Concepts Blade Forward Controls 573814
Dennis Kirk Part #: 573814
Billet Concepts Blade Forward Controls 573814: Manufacturer part # 611308 - These controls are CNC-machined before being given a lustrous finish. They also feature a smooth contoured master cylinder that seems to blend right into the controls for an ultra clean look, and the arms and backing plate are machined out of 3/4 in. aluminum plate for and extra beefy look. , NOTE: Fits models listed or custom applications. 611308
Expected Soon
More Info/Options for Billet Concepts Blade Forward Controls 573814
|
|
|
|
CLOSEOUT!
Was: $769.99
Now: $577.49
Billet Concepts Blade Forward Controls 573815
Dennis Kirk Part #: 573815
Billet Concepts Blade Forward Controls 573815: Manufacturer part # 611309 - These controls are CNC-machined before being given a lustrous finish. They also feature a smooth contoured master cylinder that seems to blend right into the controls for an ultra clean look, and the arms and backing plate are machined out of 3/4 in. aluminum plate for and extra beefy look. , NOTE: Fits models listed or custom applications. 611309
1 on Hand
More Info/Options for Billet Concepts Blade Forward Controls 573815
|
|
|
|
$139.99
Billet Concepts Chrome Smooth Radius Brake Arm w/Peg 573810
Dennis Kirk Part #: 573810
Billet Concepts Chrome Smooth Radius Brake Arm w/Peg 573810: Manufacturer part # 611382 - The design team at Custom Chrome and Billet Concepts joined forces to create this new line of Billet Floorboard. They are CNC-machined from 6061-T6 billet aluminum to the highest industry standards before being chrome plated.. 611382
| |
