|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CLOSEOUT!
Was: $71.99
Now: $53.99
Gunmetal Factory 909 Team Handlebar
Dennis Kirk Part #: 591435
Gunmetal Factory 909 Team Handlebar: Manufacturer part # 090007 - Stronger with more feel than standard crossbar-mounted handlebars. Constructed of 7075 Ergal aluminum. Heat treated to exacting specifications for increased strength and resiliency. Forged bar clamps on cross bar increase the 909s strength. Allow for a measurable degree of flex without slipping.. 090007
1 on Hand
More Info/Options for Gunmetal Factory 909 Team Handlebar
|
|
|
|
|
|
$56.99
Gunnar Black Tether Kill Switch, Normally Closed 211100
Dennis Kirk Part #: 211100
Gunnar Black Tether Kill Switch, Normally Closed 211100: Manufacturer part # GK1013NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1013NC
4 on Hand
More Info/Options for Gunnar Black Tether Kill Switch, Normally Closed 211100
|
|
|
|
$56.99
Gunnar Blue Tether Kill Switch, Normally Closed 211099
Dennis Kirk Part #: 211099
Gunnar Blue Tether Kill Switch, Normally Closed 211099: Manufacturer part # GK1012NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1012NC
3 on Hand
More Info/Options for Gunnar Blue Tether Kill Switch, Normally Closed 211099
|
|
|
|
|
|
|
|
|
|
|
|
$56.99
Gunnar Red Tether Kill Switch, Normally Closed 211098
Dennis Kirk Part #: 211098
Gunnar Red Tether Kill Switch, Normally Closed 211098: Manufacturer part # GK1011NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1011NC
2 on Hand
More Info/Options for Gunnar Red Tether Kill Switch, Normally Closed 211098
|
|
|
|
$56.99
Gunnar Tether Kill Switch, Normally Closed 211097
Dennis Kirk Part #: 211097
Gunnar Tether Kill Switch, Normally Closed 211097: Manufacturer part # GK1010NC - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1010NC
4 on Hand
More Info/Options for Gunnar Tether Kill Switch, Normally Closed 211097
|
|
|
|
$37.99
Gunnar Tether Kill Switch, Normally Open 210426
Dennis Kirk Part #: 210426
Gunnar Tether Kill Switch, Normally Open 210426: Manufacturer part # 1011 - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 1011
4 on Hand
More Info/Options for Gunnar Tether Kill Switch, Normally Open 210426
|
|
|
|
$37.99
Gunnar Tether Kill Switch, Normally Open 210427
Dennis Kirk Part #: 210427
Gunnar Tether Kill Switch, Normally Open 210427: Manufacturer part # 1012 - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 1012
1 on Hand
More Info/Options for Gunnar Tether Kill Switch, Normally Open 210427
|
|
|
|
$37.99
Gunnar Tether Kill Switch, Normally Open 210428
Dennis Kirk Part #: 210428
Gunnar Tether Kill Switch, Normally Open 210428: Manufacturer part # 1010 - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 1010
1 on Hand
More Info/Options for Gunnar Tether Kill Switch, Normally Open 210428
|
|
|
|
$37.99
Gunnar Tether Kill Switch, Normally Open 210438
Dennis Kirk Part #: 210438
Gunnar Tether Kill Switch, Normally Open 210438: Manufacturer part # 1013 - Tether kill switch is easy to install - plugs into most machines. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 1013
3 on Hand
More Info/Options for Gunnar Tether Kill Switch, Normally Open 210438
|
|
|
|
$2430.99
H02002 Primo Brute V Super Street Drive Belt System
Dennis Kirk Part #: H02002
H02002 Primo Brute V Super Street Drive Belt System: Manufacturer part # PB5ELTCP - First 3 1/2in. wide, 14mm belt drive system available. Designed and manufactured to handle all the horse power your big bad stroker can dish out. Kit includes front pulley, rear pulley, clutch, clutch hub, starter housing, polished backing plate and drive belt. Diaphragm spring clutch designed to increase clutch area 325 percent while retaining easy hand operation as expected from Evolution-style clutch. Belt is Kevlar®-reinforced, and is five times stronger than steel, as well as lighter and more durable than fiberglass. Replacement Kevlar belt available separately H02-004. For Softail 90-03 models with electric start. All hardware included. Made in the U.S.A.. NOTE: This item ships 3-4 days after the order is placed. PB5ELTCP
1 on Hand
More Info/Options for H02002 Primo Brute V Super Street Drive Belt System
|
|
|
|
$2628.99
H02003 Primo Brute V Super Street Drive Belt System
Dennis Kirk Part #: H02003
H02003 Primo Brute V Super Street Drive Belt System: Manufacturer part # PB5EL90P - First 3 1/2in. wide, 14mm belt drive system available. Designed and manufactured to handle all the horse power your big bad stroker can dish out. Kit includes front pulley, rear pulley, clutch, clutch hub, starter housing, polished backing plate and drive belt. Diaphragm spring clutch designed to increase clutch area 325 percent while retaining easy hand operation as expected from Evolution-style clutch. Belt is Kevlar-reinforced, and is five times stronger than steel, as well as lighter and more durable than fiberglass. Replacement Kevlar belt available separately-H02004. For Softail 90-03 models with electric start. All hardware included. Made in the U.S.A.. NOTE:This item ships in 3-4 days after the order is placed. PB5EL90P
1 on Hand
More Info/Options for H02003 Primo Brute V Super Street Drive Belt System
|
|
|
|
