- PRO-ONE Forward Controls use folding, adjustable footrests rather than rigid mounts
- Other high tech features include roller bearings and thrust bearings on all pivot points for precision actuation of the brake and shift levers without any slop or play
- Mounting plates, brake and shift levers made of 6061-T6 aluminum
- Footpeg mounts, brake and shift lever shafts are machined from stainless steel
- Folding footpeg design
- Controls include linkage rods and master cylinder
NOTE:
- This kit will require a custom brake line
- This item ships 3-4 days after the order is placed.
INCLUDED ITEMS:
- One brake side assembly
- One shift side assembly
- One set driver footpegs
- One shift peg
- One brake peg
- One 2 1/2 in. x 2 1/2 in. mounting plate
- Two heim joints
- One mounting bracket
- One shifter rod
- Four 3/8 in.-16 x 1 1/4 in. socket head bolts
- Four 5/16 in.-18 x 1 in. socket head bolts
- One 3/8 in.-16 x 3/4 in. socket head bolt
- Two 3/8 in.-16 x 1 1/4 in. button head screws
- Two 3/8 in.-16 x 1 in. button head screws
- One 5/15 in.-18 x 1 in. flat head screw
- Two 5/16 in. nylock nuts
- Two 5/16 in. hex nuts
- One 5/16 in. nylock nut
- Five 5/16 in. flat washers
- Ten 3/8 in. flat washers
- One instruction sheet
Specs Pro-One Chrome Billet Forward Controls-3 in. Extended Ball Milled 501010
- Type: Forward Control
- Units: Each
Images Pro-One Chrome Billet Forward Controls-3 in. Extended Ball Milled 501010
(click on photo(s) for larger images)
Pro-One Chrome Billet Forward Controls-3 in. Extended Ball Milled 501010
Sizing Pro-One Chrome Billet Forward Controls-3 in. Extended Ball Milled 501010sizing
Sendtofriend Pro-One Chrome Billet Forward Controls-3 in. Extended Ball Milled 501010
Limited Time Only!
