- Tether kill switch is easy to install - plugs into most machines
- Narrow design, installs on slightly curved portion of the bars
- Housing O-ring weatherproofed
- Matching lanyard included
- Replacement lanyard available separately
- This tether is normally open. To see if this is correct for your machine you must perform the following test
- 1. Locate the two wires going to your machine's kill switch
- 2. With the kill switch in the run position, test for continuity between the two wires
- 3. If you DO NOT have continuity, this tether switch WILL work for your machine
- 4. If you DO have continuity, this tether WILL NOT work for your machine
NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine
Specs Gunnar Tether Kill Switch, Normally Open 1011
- Color: Red
- Type: Kill Switch
- Units: Each
Fitment Gunnar Tether Kill Switch, Normally Open 1011
- * This item does not have any factory standard/original
equipment fitments. Please use the information provided
in the specs and overview tabs to determine if this part
will work for your application.
Images Gunnar Tether Kill Switch, Normally Open 1011
(click on photo(s) for larger images)
Gunnar Tether Kill Switch, Normally Open 1011
Sizing Gunnar Tether Kill Switch, Normally Open 1011sizing
Sendtofriend Gunnar Tether Kill Switch, Normally Open 1011
Limited Time Only!
