- Dennis Kirk offers batteries that are exact replacement of the originals requiring no modifications to install
- All are shipped dry and must be filled with electrolyte (not included) before use
- Utilizes Sulfate Stop to retard battery-killing sulfation
- Dimensions:
Length: 5-3/8 in.
Width: 3-9/16 in.
Height: 6-5/8 in. - Cold cranking amps: 128
FOR LONGEST BATTERY LIFE -- 1.Fill new battery with electrolyte so plates are just covered (electrolyte expands when charged).
- 2.Charge with 2-amp maximum charge for 1 1/2 hours.
- 3.Fill to upper level mark with distilled water.
- 4.Charge for 15 minutes to thoroughly mix water and electrolyte so battery wont freeze.
- 5.Clean cable terminals and coat both cable and terminals with petroleum jelly after tightening to prevent corrosion.
Specs Yuasa Conventional Battery 12N143A
Images Yuasa Conventional Battery 12N143A
(click on photo(s) for larger images)
Yuasa Conventional Battery 12N143A
Sizing Yuasa Conventional Battery 12N143Asizing
Sendtofriend Yuasa Conventional Battery 12N143A