You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis- Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners
- Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift
- Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort
- Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder
- Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted
- Recommended for use in mountain/powder conditions and for snocross-type riding
- For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods
NOTE:Use one of the following wear rods:
Stud BoyShaper 4 1/2 in. part number 031892
Shaper 6 in. part number 031893
Shaper 7 1/2 in. part number 031894
SLPTrail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823
Loose snow carbide part number 031490
Loose snow carbide part number 031491
Pro race snocross carbide part number 031636
Non-carbide keel blade for use with part number 10823; use part number 10824
Specs Starting Line Powder Pro Skis 35-341
Fitment Starting Line Powder Pro Skis 35-341
- * This item does not have any factory standard/original
equipment fitments. Please use the information provided
in the specs and overview tabs to determine if this part
will work for your application.
- Don't see what you want?
-
Click here to see the next Part number.
Images Starting Line Powder Pro Skis 35-341
(click on photo(s) for larger images)
Starting Line Powder Pro Skis 35-341
Sendtofriend Starting Line Powder Pro Skis 35-341
Limited Time Only!
