- Inexpensive way to boost power from 95 in. Twin Cam engines with stock heads
- Includes S&S Super E carburetor kit, S&S gear drive cam set, adjustable pushrod kit, S&S 640 in. valve springs, bearings, gaskets and instructions
- Require special 3 7/8 in. bore pop up dome pistons (sold separately, part numbers listed below ) which yield a 95 in. cubic-inch displacement and increase the compression ratio to 9.7:1 with stock cylinder heads
- Made in the U.S.A.
95" Pop-Up Piston Kits - Standard part no. 131201S
- + .005" part no. 13120105
- + .010" part no.1312011
- + .020" part no. 1312012
NOTE: We recommend these kits for engines with ported cylinder heads to take advantage of the increased lift of the S&S cams. Kits with the 585G camshafts are recommended for engines with decked cylinder heads and compression ratio of 10:1 to 10.5:1. S&S 95 in. kits may be installed in stock 88 in. engines if the stock 88 in. cylinders are bored from 3 3/4 in. to 3 7/8 in. bore, or if 3 7/8 in. bore cylinders are purchased(DK part no. H14037)
NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.
NOTE: This item ships in 3-4 days after the order is placed.
Specs S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam
- Type: Hot Set Up Kit
- Units: Kit
Images S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam
(click on photo(s) for larger images)
S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam 149421
Sizing S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Camsizing
Sendtofriend S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam