- Crane Cams explosive dyno proven HP, torque RPM and reliability now available for Twin-Cam 88 engines
- Computer-designed hydraulic cams available for mild street/cruising to killer, race engine build-ups
- Lobe-to-lobe cam profile accuracy for off-idle torque to high-rpm horsepower
Hot Street Performance, Modified
- For modified engines with 10.25:1-up compression, big bore kits, head mods
- Must use Crane valve springs, clearanced for .600 in. lift
- Must use performance air cleaner and exhaust
- Designed for use with Edelbrock Performer RPM Twin Cam cylinder heads
NOTE: All cams are made for 1999 and up Twin Cam 88 in. engines. All cams are made for splined cam sprocket, 2000 models and later can use stock gear and bolt assembly. Use rear cam roller bearing assembly HD #8983
Intake
Duration @ .053 in.: 246 degree
Open: 20 degree
Close: 46 degree
Valve Lift: .619 in.
Exhaust:
Duration @ .053 in.: 254 degree
Open: 52 degree
Close: 22 degree
Valve Lift: .619 in.
RPM Range: 2,000 - 6,000
Specs Crane Cams 296-2 Chain Drive Street Performance Cam 13005
Images Crane Cams 296-2 Chain Drive Street Performance Cam 13005
(click on photo(s) for larger images)
Crane Cams 296-2 Chain Drive Street Performance Cam 13005
Sizing Crane Cams 296-2 Chain Drive Street Performance Cam 13005sizing
Sendtofriend Crane Cams 296-2 Chain Drive Street Performance Cam 13005
Limited Time Only!
