- Kits include Mud Lite XTR radials mounted C-Series Type 7 12" wheels
- Front is 26x9R-12; rear is 26x11R-12
- Sold each
- Lug nuts and center caps sold separately
NOTE:
To order for an entire machine, please order separate right and left front kits and separate right and left rear kits.
Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle.
The following models must use ITP lug nut Part No. 55-0205:
Honda TRX500FA/FGA Foreman Rubicon 4x4 01-08 (all)
Kymco MXU 500 4x4 08 (all)
Yamaha YFM600F Grizzly 4x4 99-01 (all)
NOTE: For Suzuki models LT-F/LT-A400/F/FC Eiger 2x4/4x4 02-07 (all) and LT-F/LT-A500F/FB/FC Vinson 2x4/4x4 02-07 (all) rear wheel offset is 1" wider than stock Suzuki Eiger/Vinson models
Dimensions:
Inflated Width/Measuring Rim Width: Not specified
Inflated Diameter: Not specified
Acceptable Rim Width(s): Not specified
Deepest Thread Depth: 1 4/32"
Balance Dot: No
Directional Arrow: Yes
Capacities and Construction:
Load Capacity: 480 lbs
Bias or Radial Ply: Radial
Maximum Inflation Pressure to Seat Bead: 35 PSI
Maximun Operatiing Pressure:7 PSI
Tread Plies/Material: 6 Nylon
Sidewall Plies/Material: 6 Nylon
DOT Approved for Road Use: No
Tube or Tubeless: Tubeless
Wheel Recommendation: None
Specs ITP Mud Lite XTR C-Series Type 7 Machined Wheel Kit 35545R
- Diameter: 26
- Position: Rear Right
- Rim Size: 12
- Tire Classification: All Terrain
- Units: Each
- Width: 11
Images ITP Mud Lite XTR C-Series Type 7 Machined Wheel Kit 35545R
(click on photo(s) for larger images)
ITP Mud Lite XTR C-Series Type 7 Machined Wheel Kit 35545R
Sizing ITP Mud Lite XTR C-Series Type 7 Machined Wheel Kit 35545Rsizing
Sendtofriend ITP Mud Lite XTR C-Series Type 7 Machined Wheel Kit 35545R
